Stan Parish, C.I.E. Texas DSHS License # MAC0360

 

 

Q1. Why should I have a mold inspection test?
A:
  • Health Reasons - Persons suffering from asthma, allergies, or other breathing impairments are often more sensitive to mold spores. Testing aids physicians attempting to isolate harmful organisms or diagnose unusual illnesses.
  • Buying or Selling Real Estate - When the indoor environment has been tested for mold associated with exposure related health issues, and the mold has been quantified and identified, the consumer is provided with valuable information that protects their interest in any potential liability case.
  • Litigation - Testing should be considered as a safeguard against personal liability and to obtain legally defensible documentation in the event that serious health concerns arise or if litigation is a realistic possibility.*
Q2. How does mold grow?
A. Mold requires moisture and cellulose that are foods for mold growth. Molds found on aluminum or other surfaces that do not appear to have cellulose or moisture are most likely due to the presence of house dust which can contain enough moisture and cellulose for mold to grow.

Q3. Is mold dangerous?
A. Numerous molds do not pose a health risk. However, some molds produce chemicals called mycotoxins that can cause flu-like symptoms or more severe health problems. A potential health risk or hazard may be present at mold site. Clean up of mold contamination is required regardless of mold type and must include the elimination of moisture.

Q4. I do not see any mold. How do I know if mold is inside my wall?
A. If you have reason to believe that you have mold inside of your wall, you will need to have the licensed assessor take an air sample. This can be taken from the interior of the wall or by removing sheet rock and inspecting inside where a sample can be taken from the exposed interior of the mold site.

Q5. Is my mold toxic?
A. Most molds are allergens to most people. Though numerous molds are harmless, the molds which produce mycotoxins are allegedly responsible for numerous health risks and/or hazards. Children, the elderly, and people with compromised immune systems are the most susceptible to health problems associated with mold exposure. People with asthma or other respiratory challenges will be more easily affected by fewer mold spores.

Q6. What are some of the most common molds found in buildings?
A. Common molds found in buildings are: Cladosporium, Aspergillus, Penicillium, and Alternaria and all are considered toxic. Stachybotrys, Fusarium, Trichoderma produce mycotoxins easily absorbed into skin, intestinal lining, airways and lungs. Other toxic molds include Coccidioides, Histoplasma, Blastomyces, and Memnoniella.

Q7. How do I clean up mold?
A. The time you are most likely to stir up spores and be exposed is the very time you are trying to clean your mold problem. This is when you need to be more careful. Be sure you are free of any health symptoms or allergies. You should consider to have a professional clean the area. Otherwise, wear goggles, gloves, breathing protection, and a solution of bleach and water.

Q8. Mold in my house: What do I do?
A. The basic rule is if you can smell odor then you need to take steps to eliminate it. The key to mold control is moisture. Fix leaky pluming or other sources of water. Reduce indoor humidity by venting restrooms, dryer, and exhaust fans when cooking.

Q9. Where can I get more information about the Texas statutes regulating licensed Mold Assessment Consultants and Mold Remediation Companies?
A. You can reach the FAQ page of the Texas Department of State Health Services website here.

Phone: (214) 754-8058

Texas Mold Inspection Service
3100 Carlisle St.
Suite# 120
Dallas, TX 75204

Fax: (214) 754-8023

© 2002 Texas Mold Inspection Service All Rights Reserved.  Legal